Bike Protection

With the Acerbis Multiconcept X-Strong Hand Guards you can add a layer of protection for your hands on the bars of your dirt bike. Learn More

Keep your controls and knuckles protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Designed specifically for the Yamaha XSR900, FJ-09 & FZ-09, the heat treated aluminum backbones with double mounting points on each side of these guards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide shelter for your hands from the brush and wind. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards.

Learn More

Keep your knuckles and levers protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Designed specifically for your motorcycle, heat treated aluminum backbones with double mounting points on each side provide the insurance needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards. Learn More

Givi Crash Bars are designed to protect the engine in the event of a tip over or mild crash. Constructed of 1in diameter mild steel, black finish.

Learn More

Protect the front brake and clutch lever on your motorcycle with Barkbusters aluminum bar lever protection handguards. Heat treated aluminum backbones with two mounting points on each side provide superb protection in the event of a tip over or crash. Ride with the confidence provided by the Barkbusters aluminum bar lever protection handguards. Learn More

Constructed of heavy-duty mild steel, SW-MOTECH crash bars are designed to provide maximum protection, optical integration, and high-quality fit and finish. Learn More

Constructed of heavy-duty mild steel, SW-MOTECH crash bars are designed to provide maximum protection, optical integration, and high-quality fit and finish. Learn More

Constructed of heavy-duty mild steel, SW-MOTECH crash bars are designed to provide maximum protection, optical integration, and high-quality fit and finish. Learn More

Constructed of heavy-duty mild steel, SW-MOTECH Crash Bars are designed to provide maximum protection, optical integration, and high-quality fit and finish. Learn More

Constructed of heavy-duty mild steel, SW-MOTECH Upper Crash Bars are designed to provide maximum protection, optical integration, and high-quality fit and finish. Learn More

Constructed of heavy-duty mild steel, SW-MOTECH Crash Bars are designed to provide maximum protection, optical integration, and high-quality fit and finish. Learn More

Protect the most essential components of your KTM during a fall or slide with SW-MOTECH crash bars. Hearty tubular steel construction is mounted securely to the main frame and prevents the frame, engine cases and radiator from contacting the ground during a mishap. A high quality powder coated finish improves durability while preventing corrosion and making these premium crash bars easy to keep clean. Installation is straightforward with no drilling, cutting, welding or any other permanent modifications required. Don't leave your KTM vulnerable to damage, Invest in superior protection with a set of German engineered crash bars from SW-MOTECH!

Learn More

Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.

Learn More

SW-MOTECH Crash Bars Engine Guards for Kawasaki KLR650 now bolt to the frame instead of the foot peg bolts for greater strength. Learn More

Maximize your wind protection with the Barkbusters largest handguard plastic! For use with single sided Storm mount and all Barkbusters backbone handguards. Learn More

Provide lever protection for your motorcycle’s front brake and clutch controls with Barkbusters aluminum bar lever protection handguards. Designed for motorcycles with 7/8 inch or 1-1/8 inch diameters, the guards feature heat treated full wrap aluminum backbones that are mounted at two points on each side for strength. Prevent ride ending damage to your motorcycle with Barkbusters aluminum bar lever protection handguards. Learn More

R&G Engine Case Covers are AMA Pro Racing approved.

This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance, durability and good looks, they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past, R&G Racing Engine Case Covers not only save weight, but can be quickly changed track side. The actual motorcycle engine case never has to be opened during install negating the need to replace gaskets or fluids. Simply remove a few bolts, snap the R&G Racing Engine Case Cover into place, and reinstall the original bolts. These could save you hundreds of dollars in the event of an accident ...

Learn More

These bar end protectors are simple to fit and replace the OEM bar end weights. Learn More

Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles, with high impact VPS guards and heat treated aluminum mounting frames, these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards. Learn More

Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Designed specifically for motorcycles with 7/8in handlebars, the heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards. Learn More

Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters. Learn More

For use with BB.ES14 handguards. Available in black, blue, orange, green, red, yellow & white. Learn More

Constructed of 26.9mm outer-diameter heavy-duty mild steel, SW-MOTECH crash bars are designed to provide maximum protection, optical integration, and high-quality fit and finish. Learn More

Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Designed specifically for the Kawasaki Versys 650 & Versys 650 LT & ABS, the heat treated aluminum backbones with two mounting points on each side of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards. Learn More

Protect your motorcycle's grips from damage with Barkbusters Aluminum Bar End Protection Plugs. Learn More

The SW-Motech potentiometer guard is designed to mount behind the left side cylinder to help protect the potentiometer from debris and other objects on the road. Learn More

Brake reservoir guards protect your rear brake master cylinder reservoir from flying debris. Learn More

R&G Front Axle Sliders / Protectors were designed to help eliminate damage to the front axle during a drop, a skidding stop or a "Low Side". Learn More

Protect your hands and levers from the wind and impact with Barkbusters VPS lever and wind protection handguards. Designed specifically for the motorcycles with tapered handlebars, the heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle trip. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards. Learn More

Keep your hands and controls protected from wind and impact damage with Barkbusters VPS lever and wind protection handguards. Designed specifically to fit the BMW F700GS, F800GS, F800GS Adventure & Yamaha XT1200Z Super Tenere, with heat treated aluminum backbones and two mounting points on each side these guards are strong enough to prevent tip-overs from ending your ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind, roosts and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards. Learn More

Designed for dual sport, enduro and trail motorcycles with 7/8in motorcycle handlebars, the Barkbusters JET lever and wind protection handguards will keep a crash from ending your ride early. Easy to install, heat treated aluminum backbones feature two mounting points to provide the strength needed to prevent lever damage. Impact resistant deflectors, available in multiple colors, provide protection for your hands from brush, thorns and roosts. Ride longer and harder with Barkbusters JET lever and wind protection handguards. Learn More

Constructed of a 4mm-thick aluminum base plate and 3mm-thick side plates for heavy-duty, light-weight protection. Where the base plates and side plates overlap, it forms a riveted 7mm-thick rail for extra rigidity. Base plate includes side protectors that wrap around the engine block to provide both bottom and side protection.

This will not fit models that are not equipped with (DCT) Automatic Dual-Clutch Transmission, for use on models without DCT use MSS.01.151.10000.

Learn More

This is the SW-MOTECH skid plate for 620, 625, 640 & 690 LC4 Models. This engine guard is constructed of a 3mm-thick aluminum base plate that is precision fit to your motorcycle for essential protection.

Learn More

Constructed of a 2.5mm-thick aluminum base plate and 3mm-thick side/bottom plates for efficient, light-weight protection. Where the base plates and side plates overlap, it forms a 7mm-thick rail for extra rigidity. Base plate includes side protectors that wrap around the engine block to provide both bottom and side protection.

 

Learn More