Cart - $0.00

You have no items in your shopping cart.

CAD
YouTube Facebook Twitter 888-524-7921 Email Us

SW-MOTECH Handlebar riser barbacks & top clamps for most BMW, Ducati, Gas-Gas, Honda, Kawasaki, KTM LC4, MZ, Suzuki, Triumph & Yamaha - pair, 31mm rise & 22mm pullback

Rating
16 Review(s)
$130.98
SKU: LEH.00.039.152

In stock

Only 10 left

Product Name Qty
Handlebar riser barbacks & top clamps (BMW, Ducati, Gas-Gas, Honda, Kawasaki, KTM LC4, MZ, Suzuki, Triumph, Yamaha) - pair, 1" rise & 1" pullback-Black 2
Handlebar riser barbacks & top clamps (BMW, Ducati, Gas-Gas, Honda, Kawasaki, KTM LC4, MZ, Suzuki, Triumph, Yamaha) - pair, 1" rise & 1" pullback-Silver 8

OR
 
Customer Reviews

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2
Review by jtbl
Rating
Need a rise and setback. This "universal" version fit my V7II bolt spacing and did not require changes to any cables on my bike. Just unbolt the existing bracket, have someone hold the bars while you fit the riser. Use some blue Loctite and torque to spec. (Posted on 16-02-02)
Review by Strom rider
Rating
Advertised as exact fit. It does fit the handlebar, but does not allow the ignition switch to properly mount on the top clamp as the clamp is rounded with recessed nolt holes. (Posted on 16-01-19)
Review by Patsfun62
Rating
Put these on my 2014 V Strom 1000 Adventure. Brake and clutch lines are very tight even with the ties and stays removed when moving the bars full left and right. May at least buy an aftermarket brake line in the future. (Posted on 16-01-13)
Review by Cresty
Rating
Installed on a 2014 Honda CB 1100, no installation problems. Wish it was available in chrome, but the silver blended well with existing chrome. (Posted on 15-09-12)
Review by Fauster
Rating
There's not much to say other than the machining of these riser barbacks was very and tgoodhe fit was perfect on my R1150R Rockster. The instructions were fine although installation was pretty straightforward. They look good, they fit, and they performed their intended use. There is less pressure on my hands and handling was not compromised. And I was still able to mount my SW-MOTECH accessory mount onto the top clamp. I'm happy. (Posted on 15-08-29)
Review by Waterbuffalo74
Rating
Installed these on my 2007 Suzuki V-Strom 650 to make and handlebars highers, and to move them further away from me. Much better placement for the handlebars when I'm standing on the pegs, and when I'm sitting also more comfortable. (Posted on 15-07-08)
Review by ken
Rating
i picked these up for my bike and yes ,they made a world of difference .they are easy to install with 'some' cable manipulation, I moved the hand controls in about a 1/4" on both sides, there is still a bit of tightness on one of the electrical cables at a full turn but the bars still lock and under normal riding conditions I don't see an issue. yes they're a hundred bucks but....worth it ! now if I can only find a 500 mile seat. ha!! (Posted on 15-06-10)
Review by Dave
Rating
I just traded my 08 VStrom (DL 1000) on the 2015 model. I pretty much had my farkling done but was looking for a solution to get the handlebars up and back. The 2015 is different in that the front brake setup goes from hose at the reservoir to a steel union at the fender affording very little slack to add bar back/risers. The clutch is about the same....in terms of very little little extra room to work. Webbikeworld.com found these bar backs that worked without having to change any hoses/cables. There is a very nice write up about this part on their site. I installed these and they worked perfectly.....I just removed the keepers under the fairing for a bit more slack. This was a huge deal......saved a whole lot of work. The part is high quality....SW Motech.....as expected. I hope this part gets listed specifically for the V2. (Posted on 15-06-10)
Review by Belrix
Rating
I installed these Barbacks on my 2012 Honda NC700X and they moved the handlebars up and back to provide a very comfortable ride!

I did have to re-position the front brake line hose a little to provide enough slack, not a big deal at all. (Posted on 15-05-14)
Review by AtomicWoodworker
Rating
Bought this riser/barback set to alleviate forward pressure on my hands at the grips of my VStrom 1000. Works exactly as advertised. Allows to ride more upright and even helps me stand up more comfortably. Great product for the price.

The only thing to watch out for are the RHS brake and throttle cables. Once installed, there is virtually no slack left in either one. Recommend loosening or repositioning a few of the cable brackets to give you more room to maneuver. (Posted on 15-05-07)

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2
Write Your Own Review

Only registered users can write reviews. Please, log in or register