x
CART
Cart - $0.00

You have no items in your shopping cart.

CAD
YouTube Facebook Twitter 888-524-7921 Email Us

Search results for 's1000rr'

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 147 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. TechSpec Gripster Tank Grips for BMW S1000R S1000RR or HP4

    TechSpec Gripster Tank Grips for BMW S1000R '14-'18, S1000RR '10-'18 & HP4 '13-'14 | Right, Left & Center Tank Grips

    Get the TechSpec Gripster Tank Grips for your BMWS1000RR or BMW HP4 and you'll experience solid tank grip without any gear snagging.

    Stop slipping during hard braking, acceleration and cornering maneuvers by adding the TechSpec Gripster tank grips to your motorcycle. These super grippy pads are precision cut to suit the contours of your tank. The low profile grips are fabricated using synthetic rubber and stay in place via a super sticky paint friendly adhesive that is pre-applied to the backs of the pads. These handy Gripster tank grips will increase long distance comfort and reduce fatigue by allowing the lower body to provide more support, relieving pressure on hands, wrists, arms and shoulders.

    To install, simply clean your tank and peel off the backing on the grips and stick them to your tank. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.

    Learn More
    $108.99

  2.  R&G Lever Guard for BMW S1000R, HP4 &, S1000RR (Blue)

    R&G Lever Guard for BMW S1000RR '09-'14, HP4 '13-'14, S1000RR '15-'18 & S1000R '14-'18

    The R&G lever guard for BMW S1000RR, HP4, S1000RR & S1000R bolts to the clip on to provide protection from unintended activation of the brake or clutch lever. Tough DuPont Zytel nylon keeps elbows from interfering with your controls in close wheel to wheel racing that could cause you to lose drive (clutch) or flip the motorcycle violently if bumped (front brake). This essential lever guard is highly recommended the track but is also great for lane splitting & filtering to prevent contact with a side view mirror that could easily send you over the bars. Street bikes also benefit from this protector when riding in groups as there is an increased risk of an accidental bump with a nearby motorcycle. Available in blue, black, green, orange or red to compliment the aesthetics of your rig. Enhance the safety of your BMW and reduce the risk of a dangerous incident with a lever guard from R&G! Learn More
    $73.99

  3. R&G Tie-Down Hook for BMW S1000RR (Black)

    R&G Tie-Down Hook for BMW S1000RR '09-'18 | Black or Gold

    Track-day motorcycles tend to spend as much time in the back of a truck or in a trailer as they do on their own two wheels. Crazy, huh? But true. It makes sense, then, that getting them to and from the track safely is an important consideration, one made easier by the R&G Tie-Down Hook set.

    Built to bolt into place where the passenger footpegs normally mount, these sturdy tie-down points give you a simple, effective means of securing the back of the bike during transit. By hooking through these fixtures, you reduce the risk of bodywork damage from an errant tie-down strap or connecting to something less than strong enough to handle the bumps and thumps in the back of a trailer.

    Keep the back end of your track motorcycle from hopping around the pickup bed or trailer with R&G's Tie-Down Hook set.

    Learn More
    $107.99

  4. R&G Radiator Cooler Guard for BMW S1000RR '15

    R&G Radiator Cooler Guard for BMW S1000RR '15-'17 | Red, Blue or Dark Blue

    R&G Radiator Cooler Guards come in a powder coated finish in a variety of colors to spruce up your BMW S1000RR. Each piece is made from pressed aluminum to give the product a neat, seamless frame. This radiator cooler guard improves the look of your bike and helps to protect your expensive and vulnerable oil cooler from flying debris. No permanent modifications need to be made to the bike.

    Learn More
    $130.99

  5. HEX Code GS911 USB & Bluetooth Enthusiast BMW Motorcycle Diagnostic tool

    HEX Code GS911 USB & Bluetooth Enthusiast BMW Motorcycle Diagnostic tool

    GS-911 USB & Bluetooth Enthusiast BMW Motorcycle Diagnostic tool.

    Generation I

    This product connects with USB & Bluetooth capability, will work on up to 10 VIN's and includes the following:

    • 1x GS911-USB & Bluetooth diagnostic interface
    • 1x mini-USB cable
    • Quick-start guide
    • One year free updates for the Windows™-based (Windows™ XP SP2, Windows™ Vista, Windows™ 7, and Windows™ 8) GS-911 software
    • Software Updates: Available here

    GS-911

    Learn More
    $465.99

  6. R&G Front Indicator Adapters for S1000R '14-'18, S1000XR '15-'18, S1000RR '10-'18, R nineT '14-'17,  R1200GS LC '13-'17 & R1200GS LC Adventure '14-'17

    R&G Front Indicator Adapters for S1000R '14-'18, S1000XR '15-'18, S1000RR '10-'18, R nineT '14-'17, R1200GS LC '13-'17 & R1200GS LC Adventure '14-'17

    These indicator adapters allow the use of our own micro indicators (RG370) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look. Learn More
    $19.99

  7. R&G Stunt Fork Pegs for BMW S1000RR '10-'17 & HP4 '13-'15

    R&G Stunt Fork Pegs for BMW S1000RR '10-'17 & HP4 '13-'15

    These Stunt Fork Pegs fit the BMW S1000RR and BMW HP4 models. Learn More
    $73.99

  8. R&G Racing Stainless Steel Braided Front Brakeline For BMW S1000RR '10-'11 (non ABS) 2-line kit

    R&G Stainless Steel Braided Front Brakeline For BMW S1000RR '10-'11 (non ABS) 2-line kit

    R&G front brake line fittings offer safety, security and a slimline attractive finish, designed for BMW S1000RR '10-'11 (non ABS) 2-line kit. Kit contains all items for complete installation with stainless steel banjo bolts, copper washers and two hoses to replace OEM hoses. Learn More
    $109.49

  9. R&G Racing Stainless Steel Braided Front Brakeline For BMW S1000RR '10-'11 (non ABS) 3-line kit

    R&G Stainless Steel Braided Front Brakeline For BMW S1000RR '10-'11 (non ABS) 3-line kit

    R&G front brake line fittings offer safety, security and a slimline attractive finish, designed for BMW S1000RR '10-'11 (non ABS) 3-line kit. Kit contains all items for complete installation with stainless steel banjo bolts, copper washers and two hoses to replace OEM hoses. Learn More
    $165.99

  10. R&G Racing Stainless Steel Braided Rear Brakeline For BMW S1000RR '10-'11

    R&G Stainless Steel Braided Rear Brakeline For BMW S1000RR '10-'11 (Not ABS)

    R&G brake line fittings offer safety, security and a slimline attractive finish, designed for BMW S1000RR '10-'11 (NON ABS Version). Kit contains all items for complete installation with stainless steel banjo bolts, copper washers and one hose to replace OEM hose. Learn More
    $56.49

  11. R&G Racing Frame Insert For BMW S1000RR, S1000R & HP4 (RHS)

    R&G Right Side Frame Insert For BMW S1000RR '13-'14, S1000R '14-'16 & HP4 '13-'14

    The R&G Racing Frame Insert For BMW S1000RR, S1000R & HP4 (RHS) is designed to clean up the look of your bike and prevent dust and debris from collecting in the frame voids. Learn More
    $40.49

  12. R&G Left Side Frame Insert BMW S1000RR '12-'14 & HP4 '13-'14

    R&G Left Side Frame Insert BMW S1000RR '12-'14 & HP4 '13-'14

    Keep your frame looking clean and sleek with R&G frame insert plugs. Learn More
    $40.49

  13. R&G Aero Style Frame Sliders for BMW S1000RR '12-'14 & HP4 '13-'14

    R&G Aero Style Frame Sliders for BMW S1000RR '12-'14 & HP4 '13-'14

    Manufactured using high density polyethylene and installs without having to drill holes in your fairing, the R&G aero style "no cut" frame sliders are perfect for your 2012-2014 BMW S1000RR or 2013-2014 HP4 (aren't you the lucky one?) Designed with a distinctive “teardrop” shape these sliders have more of streamlined look than your average round ones. A uniquely designed bracket moves the location of the frame slider away from the mounting point to a hole in your frame and voila! You get frame sliders without cutting your plastics. De-embrittled steel is used in the making of the bolts; rather than breaking off or twisting your mounting point, they bend. Let the R&G aero style "no cut" frame sliders take the damage in the event of a crash, spill or drop, instead of your frame, fairing, engine or radiator. Learn More
    $229.49

  14. R&G Left Side engine case slider for BMW S1000RR '10-'18, HP4 '13-'14, S1000R '14-'18

    R&G Left Side engine case slider for BMW S1000RR '10-'18, HP4 '13-'14, S1000R '14-'18

    The R&G engine case slider (left-hand cylinder) for your BMW S1000RR, HP4, and S1000R fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop. Fitted with the use of a tough silicon sealant (provided with the kit) for secure adhesion. Learn More
    $79.49

  15. R&G Race Shift Pattern Adjustable Rearsets for BMW S1000RR '10-'14 & S1000R '14-'16

    R&G Race Shift Pattern Adjustable Rearsets for BMW S1000RR '10-'14 & S1000R '14-'16

    Maximize your potential, tune your machine to your exact requirements. R&G Racing Adjustable Rearsets are milled out of lightweight aluminum for high strength and durability. These adjustable rearsets provide the rider with a Race or "GP Shift" (1up - 5 down). Should you require road shift-pattern (1 down - 5 up) pattern please see the R&G S1000RR & S1000R Adjustable Rearsets. These race oriented rearsets provide a large range of adjustments and exact positioning to suit every rider (11 positions). Learn More
    $681.49

  16. R&G "Tail Tidy" License Plate Holder for BMW S1000RR

    R&G "Tail Tidy" Fender Eliminator for BMW S1000RR '15-'18

    Clean up the rear end of the BMW S1000RR with a powder coated steel R&G "Tail Tidy" Fender Eliminator. Learn More
    $183.49

  17. R&G Racing Engine Case Right Side Cover For BMW S1000RR '10-'15, HP4 '13-'15 & S1000R '14-'15

    R&G Race Series Engine Case Right Side Cover For BMW S1000RR '10-'16, HP4 '13-'14, & S1000R '14-'16

    ama approved logo

    R&G Engine Case Covers are AMA Pro Racing approved.

    This Engine Case Cover protects the Right Hand Side Clutch Case Cover. Also check out R&G Crash Protectors for additional protective reinforcement. 

    Learn More
    $133.49

  18. R&G Race Series Engine Case Cover Kit for BMW S1000R, S1000RR & S1000XR | 3 Piece

    R&G Race Series Engine Case Cover Kit for BMW S1000R '17-'18, S1000RR '17-'18 & S1000XR '17-'18 | 3 Piece

    This R&G Race Series engine case cover kit was developed to meet the standards and needs of both race teams and riders alike. Each unit is crafted from impact absorbing and abrasion resistant polypropylene with a replaceable puck or slider at the point of impact for even greater protection. If a fall does take place, just the "puck" can be replaced allowing the cover to be continually reused! The polypropylene is 4mm thick for strength, durability and sharp aesthetics, these right side covers are easy to install, by simply bolting on over the original engine casing. That's right! No messy adhesives needed for mounting! Ground clearance is not sacrificed with the low profile. Invest in proper protection for the heart and soul of your BMW and add a R&G Racing Series engine case cover kit! Learn More
    $338.99

  19. R&G Race Series Engine Case Cover for BMW S1000R, S1000RR & S1000XR | RHS Clutch

    R&G Race Series Engine Case Cover for BMW S1000R '17-'18, S1000RR '17-'18 & S1000XR '15-'18 | RHS Clutch

    The R&G Race Series engine case cover for BMW S1000R, S1000RR & S1000XR | RHS clutch provides critical protection to reduce the risk of damage in the event of a fall or slide. Sturdy 4mm polypropylene construction is impact absorbing and abrasion resistant to defend against cracks and wear through. This top shelf Race Series engine cover includes a replaceable slider puck at the impact face for even greater slide resistance. The slider puck is made from the same HDPE (High Density Polyethylene) as the successful frame and axle sliders and can be quickly replaced after a small spill to restore full protection. This cover mounts directly over the original BMW clutch cover without the need for modifications, fluid loss, or gasket replacement and utilizes the existing mounting holes with replacement hardware. Highly recommended for track and street use as this relatively small investment can prevent costly repairs, loss of oil and risk of motor failure. Don't leave the heart of your Bavarian beast exposed, protect it with an R&G Race Series engine case cover! Learn More
    $133.49

  20. Standard Motorcycle Protection Package for BMW RnineT

    Standard Motorcycle Protection Package for BMW R nineT '14-'17

    Provide protection to the vital components of your BMW R nineT '14-'17 with the standard motorcycle protection package. With stylish, rugged and functional bar end sliders, crash bars, skid plate, sidestand foot enlarger, rear brake reservoir guard and headlight guard, your motorcycle will be protected and look great. Enjoy the ride with the peace of mind and style given by the standard motorcycle protection package. Learn More

    From: $43.99

    To: $918.94

  21. R&G Exhaust Protector For BMW S1000RR - Includes Rubber Strip for Shock Absorption

    R&G Exhaust Protector For BMW S1000RR '15-'17

    To prevent can rash in the event that your motorcycle ends up sliding away from you, grab the R&G exhaust protector for BMW S1000RR. This protective guard features a piece of polypropylene that secures to the front of your exhaust via a jubilee clip. Shock absorbing rubber is added to the underside of the polypropylene as an extra layer of protection for your can. When your motorbike ends up in a skid, the exhaust protector takes the brunt of the impact and is designed to wear down, rather than your exhaust, which is expensive to repair. Installation is simple; place the protector over your exhaust and tighten the jubilee clip until it is secure. Learn More
    $57.99

  22. R&G Oil Cooler Guard for BMW S1000RR, HP4, S1000R & S1000XR | Light Blue

    R&G Oil Cooler Guard for BMW S1000RR '09-'18, HP4 '13-'14, S1000R '14-'18 & S1000XR '15-'18 | Light Blue

    This R&G Oil Cooler Guard gives your BMW S1000R, S1000RR, or HP4 protection against potentially damaging debris like rocks, bugs, and other UFO's. Learn More
    $84.99

  23. R&G Titanium Radiator Guard for BMW S1000RR

    R&G Titanium Radiator Guard for BMW S1000RR '15-'18

    This R&G Titanium Radiator Guard is designed for ultimate strength and lightweight protection to safeguard the radiator on the S1000RR. With twice the strength of aluminum mesh, fragile cooling fins are shielded from flying stones and debris that may be kicked up when following other bikes at the track, or traffic and trucks on the road. Save yourself from being stranded on the side of the road and protect your radiator with this super trick unit from R&G. Don't settle for anything but the best!

    Learn More
    $217.49

  24. R&G Road & Race Shift Adjustable Rearsets for S1000RR

    R&G Road & Race Shift Adjustable Rearsets for S1000RR '15-'18

    These R&G Road and Race Shift Rearsets improve the performance of the mighty S1000RR. Improved grip from the knurled footpegs ensures your boots will stay put even in the wet. The rearsets can be set up as standard or GP shift without additional hardware or modifications. Enjoy effortless buttery smooth shifting and braking in 11 different possible positions to find the most comfortable and functional ergos for racing or enthusiastic riding. Anodized in black for durability and stealth aesthetics.

    Learn More
    $681.49

  25. Pyramid Plastics Fender Extender For BMW S1000RR

    Pyramid Plastics Fender Extender For BMW S1000RR '10-'18

    The Pyramid Plastics fender extender is the solution for the road grit and gravel that the front tire of your BMW S1000RR kicks up while your tacking on those miles.

    This fenda extenda will provide the protection you need by easily attaching it to your original fender by drilling four holes in the guard and using the provided screws.

    Learn More
    $46.99

  26. Givi D5104S Windscreen for BMW S1000RR '10-'14 | Smoke

    Givi D5104S Windscreen for BMW S1000RR '10-'14 | Smoke (Discontinued)

    Note: This product is no longer able to be ordered. Please view related products on the right side of this page for more gear & accessories that you may be interested in.

    The Givi D5104S Windscreen is a direct replacment for your original windsheild. Added height enhances rider protection while in the tucked position on the mighty S1000RR at speed. Available in a light smoke tint, this screen improves cockpit visibility while also adding some classy Italian fashion! 

    Learn More
    $189.00 $161.99

  27. R&G Carbon Fiber Brake Lever Guard for S1000RR, HP4 & S1000R

    R&G Carbon Fiber Brake Lever Guard for S1000RR '09-'14, HP4 '13-'14, S1000R '14-'18 & S1000RR '15-'18

    This bike protection accessory was developed to help avoid the accidental engagement of the front brake lever during close wheel-to-wheel racing. A Brake Lever Guard can be equally as valuable for road riding by protecting your lever(s) from wing mirror strikes which may also result in brake engagement. 

    Learn More
    $269.99

  28. R&G Stainless Steel Radiator Guard for BMW S1000RR

    R&G Stainless Steel Radiator Guard for BMW S1000RR '15-'18

    The R&G stainless steel radiator guard for the BMW S1000RR is constructed from 1mm stainless steel making incredibly strong and impervious to rust. The laser-cut grill is designed for maximum airflow to the radiator, while deflecting stones and other debris that could damage fragile cooling fins. This essential stainless steel radiator guard is stronger than aluminum for maximum cooling system protection. Installation is simple with existing mounting points utilized. Give your Bavarian rocket superior protection that could mean the difference between riding home or finding a ride home!

    Learn More
    $137.49

  29. R&G Road Shift Pattern Adjustable Rearsets for BMW S1000RR '10-'14 & S1000R '14-'16

    R&G Road Shift Pattern Adjustable Rearsets for BMW S1000RR '10-'14 & S1000R '14-'16

    Maximize your potential, tune your machine to your exact requirements. R&G Racing Adjustable Rearsets are milled out of lightweight aluminum for high strength and durability. These adjustable rearsets provide the rider with a "Street Shift" (1 down - 5 up) pattern. Should you require the race or "GP Shift" (1up - 5 down) pattern please see the R&G S1000RR and S1000R Racing Rearset (RG.RSET04BK). Learn More
    $681.49

  30. SW-MOTECH Bags-Connection Blaze Sport Saddlebag System For BMW S1000RR '12-'14 & S1000R '14-'18

    SW-MOTECH Bags-Connection Blaze Sport Saddlebag System For BMW S1000RR '12-'14 & S1000R '14-'18

    The SW-MOTECH Bags-Connection Blaze Sport Saddlebag System offers an innovative way to mount soft saddlebags onto sport-style motorcycles. The system features mounting arms that quickly attach to the motorcycle and then slip into channels located on the backside of each bag. These arms ease installation and support the bags to prevent side-to-side movement and potential contact with the exhaust or rear tire. The mounting arms detach quickly to retain the stock look of the motorcycle when the bags are removed. The SW-MOTECH Bags-Connection Blaze Sport Saddlebags feature durable YKK RC-Fuse zippers and are expandable from 14 to 21 liters per bag.

    Learn More
    $444.98

  31. R&G Mirror Blanking Plates For BMW S1000RR

    R&G Mirror Blanking Plates for BMW S1000RR '10-'18 & HP4 '13-'14

    The R&G mirror blanking plates for BMW S1000RR, HP4 & S1000RR provide a clean finished appearance after removal of the mirrors. Precision machined High Density Polyethylene provides a perfect fit in the factory mounting location without the need for cutting, drilling or any other modifications. These neat little blanking plates properly secure the fairing to the fairing stay while providing an aggressive low profile appearance. Highly recommended when preparing your motorcycle for track days! Enhance the appearance of your Bavarian beast with these mirror blanking plates from R&G! Learn More
    $57.99

  32. R&G Tank Traction Grips for BMW S1000RR '15

    R&G Tank Traction Grips for BMW S1000RR '15-'17

    R&G Tank Traction Grip kits are designed with applications for a myriad of different styles and brands of bikes. Each adhesive pad features a unique texture specially designed for long term use and comfort, allowing the rider to maintain better bike control and providing support to achieve the ideal body position when braking and cornering. The R&G Tank Traction Grip also helps prevent against fatigue enabling focus on the road instead of having to constantly right yourself due to sliding down the tank.

    Learn More
    $48.49

  33. HEX Code GS911 USB Enthusiast Motorcycle Diagnostics Tool (Discontinued)

    HEX Code GS911 USB Enthusiast Motorcycle Diagnostics Tool (Discontinued)

    Note: The Hexcode-GS911 USB Enthusiast Diagnostics Tool has been discontinued and is no longer able to be ordered.

    GS-911 Diagnostic tool for BMW motorcycles

    This diagnostic tool offers a unique software and hardware combination that allows the BMW enthusiast the ability to communicate with the control modules in a safe and controlled manner. Turn your PC or mobile phone into a powerful fault-finding tool... In the true spirit of adventure riding, the GS-911 tool is also available with a Bluetooth interface, allowing you to use it with most modern mobile phones with no additional accessories required.

    Click Here to See the GS-911 Function Chart for New Updates!

    Learn More
    $389.99

  34. Hexcode-GS911 USB Professional Diagnostics Tool

    HEX Code GS911 USB Professional Diagnostics Tool

    GS-911 Diagnostic tool for BMW motorcycles

    This diagnostic tool offers a unique software and hardware combination that allows the BMW enthusiast the ability to communicate with the control modules in a safe and controlled manner. Turn your PC or mobile phone into a powerful fault-finding tool... In the true spirit of adventure riding, the GS-911 tool is also available with a Bluetooth interface, allowing you to use it with most modern mobile phones with no additional accessories required.

    Click Here to See the GS-911 Function Chart for New Updates!

    Learn More
    $665.99

  35. R&G Eazi-Grip Boot Guards for BMW S1000RR '10-'15 & S1000R '14-'15

    R&G Frame Guard Kit for BMW S1000RR '10-'14 & S1000R '14-'16 | 2 Piece

    Prevent wear and tear with the R&G frame guard kit for BMW S1000RR '10-'14 & S1000R '14-'16 | 2 piece pads for the lower frame. Low profile protection adds only millimeters to prevent scratches and scrapes from constant contact with boots during braking and shifting. These handy frame guards preserve the factory finish so your motorcycle continues to look it's best for miles to come. Installation is very easy, simply peel and stick. Protect your pride and joy with the frame guard kit from the experts at R&G! Learn More
    $37.49

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 147 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5