Take the Admore Large LED Light Bar, apply steroids and this is what you get. A 10.75-inch long high power/low current light bar with running, brake, turn and hazard functionality.
Constructed of 72 high-intensity bi-color LEDs in four clusters. Housed in a black polycarbonate case with a smoked lens.
- Red tail light (50% intensity)
- Red brake light (maximum intensity)
- Yellow turn signals
- Hazard functionality - where the bike is pre-wired for this functionality
When you brake, a built-in brake light modulator will make the light bar flash 3 times before maintaining a 100% intensity red. This helps to alert drivers behind that you are slowing down or stopping.
The turn signal progressively scrolls from the center outwards to help draw attention.
Approx. size: 10-3/4" across x 1-5/8" tall x 1" thick (27cm x 3.6cm x 2.5cm)
AdMore simplifies installation by providing Posi-Tap electrical connectors. Posi-Taps allow you to wire the light bar to your original wiring harness without tools - no stripping, crimping, or soldering required!
The kit includes mounting hardware including nuts and bolts to attach the light bar directly to a license plate or any flat surface, warranty information and wiring ins
For installations on motorcycles with an LED Tail Light such as the BMW R1200GS LC '13-'14, it is recommended that the RED wire be connected to the positive circuit of the motorcycle’s Auxiliary Power Supply socket or accessory. With this installation, the BLUE wire continues to be connected to the Tail Light wire.